请教大神:PS液化工作不能正常使用,圈圈变形工具变成了十字架,如何解决...
画笔太大,圆圈超出了画面的范围。画笔太小,当画笔小到一定的程度,就只看到一个十字了。
打开了键盘大写功能键,即键盘上的Caps Locks键;解决办法是再次按下键盘上的大写Caps Locks键就变成正常了。
按中括号键 “[” 就可以调小画笔,或者在右边的“画笔大小”里调小画笔。
PS在画布上可以拖动鼠标动态的拖放是因为开了性能里面的“使用图形处理器”的OpenCL,才有的“带动画效果的缩放”。
这是因为ps会对rgb颜色模式的图片液化使用GPU来进行处理。有些电脑的GPU会出现不兼容的情况,导致无法液化。更换颜色模式即可解决。方法如下。
为什么ps一打开液化就停止工作
1、系统文件损坏或丢失:使用u深度u盘启动盘引导进入pe系统进行重装系统。分区表损坏:使用u深度u盘启动盘引导进入pe系统,使用分区表修复器进行修复。
2、PS液化崩溃的原因 电脑硬件配置达不到要求。PS运行起来占内存,低配置的电脑会自动关闭软件或者软件未响应,系统维持自己为前提。打开程序太多,系统负荷太大。建议修图的时候关掉杀软、网页、QQ等等,当然要视个人情况而定。
3、电脑配置低,带不起来PS,PS运行起来占内存,低配置的电脑会自动关闭软件或者软件未响应。软件有问题,重新下载一个,与你电脑的兼容性有问题,或都本身软件就有问题。
4、PS在画布上可以拖动鼠标动态的拖放是因为开了性能里面的“使用图形处理器”的OpenCL,才有的“带动画效果的缩放”。
5、有可能是液化工具本身损坏了。非正版软件,有时候就会有某些功能用不了的,不奇怪。
为什么我的PS6使用液化就不运行了?
1、你的内存不够,或者显卡带不起。或者是打开太多程序了。所以才这样。还有就是多设置一个缓冲区域,Ctrl+K 性能里面设置下内存大小,多设一个缓冲区就好了。
2、PS液化崩溃的原因 电脑硬件配置达不到要求。PS运行起来占内存,低配置的电脑会自动关闭软件或者软件未响应,系统维持自己为前提。打开程序太多,系统负荷太大。建议修图的时候关掉杀软、网页、QQ等等,当然要视个人情况而定。
3、我来告诉你正确答案。因为液化会调用显卡硬件加速。如果你的显卡驱动过老或者显卡不支持硬件加速,那么就会出现系统错误。解决的办法是点击菜单栏的 编辑-首选项-性能-取消使用图形处理器前面的钩钩-确定。
4、扩大内存,不要用少于4G的内存 以上是比较大众化的建议,楼主先试一下。不过,就个人经验,这个问题是出在显卡驱动上。虽然楼主没说电脑配置,但我猜楼主用的应该是ATI的显卡,而且驱动最近更新过吧。
5、电脑不心装上了恶意软件,或上网时产生了恶意程序,建议用360 卫士 、金山卫士等软件,清理垃圾,查杀恶意软件,完成后重启电脑,就可能解决。实在不行,重装,还原过系统,可以解决软件引起的问题。
PS的液化功能用不了怎么办
PS的液化功能用不了是使用错误造成的,解决方法为:打开ps导入图片,点击滤镜。接下来需要在弹出的下拉选项里点击液化。打开液化模式,在右边的界面设置画笔大小和压力。
启动pscs6软件。在编辑菜单下选择首选项。在窗口中,取消使用图形处理器。关闭ps软件,重新启动ps软件即可。
PS液化不了,建议卸载PS后,重新安装PS试试。也可以换一个版本试试。或重新下载PS液化滤镜。
第一步、打开PS后点“编辑”---“首选项”---“性能”。第二步、勾选非系统盘为暂存盘,如图除了C盘其他盘都可以勾选上,最后点保存。第三步、接着选择“文件处理”---“Camera Raw首选项”。
ps液化工具突然不见了
你到Adobe Photoshop CS4\Plug-ins\Filters中找找看,有没有一个名为Liquefy的8BF格式的文件,这个就是液化,如果找不到,可以去下载一个***到这里来。
具体操作步骤如下:启动PS软件,并新建一个文档。进入到PS的操作界面中。我们界面顶端这里,这里是菜单栏。找到并点击“滤镜”菜单。在弹出的下拉菜单中,就看到“液化”工具了。
利用其广泛的编修与绘图工具,可以更有效的进行图片编辑工作。今天介绍一下Ps液化工具无法使用如何解决。双击打开“PS”软件。点击“编辑”-“首选项”-“性能”。取消勾选“使用图形处理器”。点击“确定”即可。