煤化工为什么需要水
1、水和碳生成一氧化碳和氢气,产生清洁能源,很重要。水+碳=一氧化碳+氢气。
2、一般的水里含有很多的杂质,比如钙离子钠离子镁离子等等,还有铁离子硫酸根离子氯离子等,这些杂质会影响化工生产的正常进行,很有可能导致化工生产副产过多效率低下,所以要用纯水来生产。
3、但煤化工行业耗水量大、废水排量大,需要大量的水来保障。根据我国煤化工的分布来看,煤化工企业大部分分布在水贫乏地区。
4、一是煤炭丰富;二是煤炭廉价。充足的水源,耗水量大是煤化工的一大特点。要保持煤化工企业正常运行,真正上规模的煤化工企业,2000-3000吨/每小时的用水量是必要的,煤化工企业对水价也比较敏感。
为什么化工厂的冷却塔大多用水做冷却剂
冷却塔原理是用水作为循环冷却剂,从一系统中吸收热量排放至大气中,以降低水温的装置;其冷是利用水与空气流动接触后进行冷热交换产生蒸汽,蒸汽挥发带走热量达到蒸发散热、对流传热和辐射传热。
原理:用水作为循环冷却剂,利用水与空气流动接触,进行冷热交换产生蒸汽,蒸汽挥发带走热量达到蒸发散热、对流传热和辐射传热等原理来散去工业上或制冷空调中产生的余热,来降低水温。
冷却塔的主要作用是降低水温度,以保证设备的正常运行和延长设备的寿命。在工业生产、空调系统、发电站等场合,设备通常会产生大量的热量,如果不及时降温处理,会导致设备过热而发生故障,甚至造成设备损坏。
冷却塔的作用和分类如下:冷却塔的作用是利用水作为循环冷却剂,从一个系统中吸收热量并排放至大气中,从而降低塔内温度,制造冷却水可循环使用的设备。冷却塔的冷却过程是通过接触散热和蒸发散热两种方式实现的。
由比热容公式:c=Q放÷(m·△t)可知当放出热量一定时,比热容大的温度变化校由△t=Q吸÷(m·c)可知当温度变化定时比热越大,吸收的热量越多。所以比热容大的更适合当冷却剂。
化工生产为什么要用纯水,超纯水,去离子水
1、纯水在生产时主要用作清洗用水及用来配制各种溶液、浆料,不同的电子元器件生产中纯水的用途及对水质的要求也不同,所以水质已经是产品成品率及生产成本的重要因素之一 。
2、超纯水作用于超纯材料的应用蒸馏、去离子化、反渗透技术或其它适当的超临界精细技术的制备过程。超纯水又称UP水,是指电阻率达到18MΩ*cm(25℃)的水。
3、在工业生产及实验室的实验中,如果涉及到使用水的工艺都被使用了去离子水,那么,许多参数会更接近设计或理想数据,产品质量将变得易于控制。
4、超纯水是为了研制超纯材料(半导体原件材料、纳米精细陶瓷材料等)应用蒸馏、去离子化、反渗透技术或其它适当的超临界精细技术生产出来的水,其电阻率大于18MΩ*cm,或接近13MΩ*cm极限值(25℃)。
5、实验室和工业生产:去离子水在实验室和工业生产中广泛应用,例如在制药、半导体、电子、化工等行业中,去离子水被用作清洗、制备、反应溶剂等。总之,去离子水是一种非常纯净的水,它的应用范围非常广泛。
氯碱工业的化学方程式为什么要用水
NaCl+2H2O=2NaOH+Cl2↑+H2↑ 工业上利用这一反应原理,制取烧碱、氯气和氢气。在上面的电解饱和食盐水的实验中,电解产物之间能够发生化学反应,如NaOH溶液和Cl2能反应生成NaClO、H2和Cl2混合遇火能发生爆炸。
饱和食盐水能降低氯气在水中的溶解度。原理:Cl2+H2O=HCl+HClO(该反应可逆)饱和食盐水中氯离子的浓度很高,根据勒夏特列原理,氯离子的浓度高能使该反应平衡向逆向移动,抑制该反应进行的程度,故能减小氯气在水中的溶解。
配平(特别是离子反应配平)时,会经常遇到H+或OH-“不够用”的情况,这时就可以在对应的一侧加上H2O来配平,因为大部分反应都是溶剂里的反应,水实际上是直接参与的。
在原电池反应中,要根据电极所处的电解质溶液的情况,考虑电极反应产物是否会与电解质中的成分反应,如果会反应,则要考虑电解质中的离子参加反应的情况加到电极反应式里或化学方程式里,这也是守恒的需要之一。
重工业为什么需水量大?
1、所办来讲,按我国发电机组的耗水能力,使用一度电就要耗水0.4-0.6公斤水,所以节约用电也是节约用水。
2、辽河水量有限,水量季节变化大。东北重工业基地,对水的需求量太大,供不应求。空气干燥,水分蒸发过快及流失量过大。降雨次数少,年降水量严重不足,水土流失速度加快。城市人口激增。
3、第1个原因:工业用水比较多。都知道沙特***是重工业国家,而且在沙特***一共有10多个工业园存在,全部都是以炼油,水泥以及石化这些工业为主。而这些工业的用水量超级大。第2个原因:个人清洁方面用水多。